Filter
Top Products
30
Message waiting indication
You have to subscribe to a voice message service (eg Telstra Message
Bank) from your local service provider to use this feature. When you
receive a voice message,
will appear on the display. When you
retrieve your messages the message
will turn off. You can also turn it
off by pressing
for 2 seconds during standby.
Paging the handsets
You can page or locate the handsets by pressing the
on the base.
All handsets registered to the base will produce the paging tone for 30
seconds and the screen displays blinking “oooo”.
You could stop the paging by pressing any key on each handset or
pressing the
on the base again.
Out of range warning
When you are talking on the phone and you take the handset too far
away from the base, you’ll hear an alert tone through the receiver. You
should bring the handset back in range with the base. Failing to do so
will result in the call being disconnected.
When the handset is too far away from the base during standby, you will
see
flashing.
LTI-HANDSET OPERATION
You can use these useful features if you have 2 or more handsets
registered to the base.
Answering an internal call
When you receive an intercom call, your handset will ring with
blinking.
You can see the calling handset number on the screen.
If you press
when the phone is ringing, the handset ringer will be
turned off for this incoming internal call.
Press
to answer.
MULTI-HANDSET OPERATION