Filter
Top Products
10
BASIC OPERATIONS
During standby
When the phone is in standby, the LCD displays the handset name. The
handset number related to the connected base will also be displayed
right justified. The battery icon reflects the current battery level and the
signal icon indicates the handset is linked to the base.
Answering an incoming external call
When there is an incoming call, the phone rings and
flashes. If a
CID record is received, the caller information is displayed.
turns on if the phone number contains more than 12 digits. In this
case, only the last 12 digits are displayed.
If you press
when the phone is ringing, the handset ringer will be
turned off for this incoming call.
1. Press
to answer the call.
turns on.
2. Call timer is displayed 10 seconds after the call is connected
3. Press
or place the handset on the base cradle to disconnect.
Making an external call
Your phone allows you to dial out a phone number in various ways.
Normal dialling
1. Press
and wait for the dial tone.
2. Use the number pad to dial the phone number. The display shows
the digits as you enter them.
3. When you enter more than 12 digits,
turns on. In this case, you
only see the last 12 digits on the screen.
Oricom 1
JOHN DOE
BASIC OPERATIONS