Filter
Top Products
Predialing
Pre-dial allows you to enter a telephone number and verify it on the screen
before you place the call. The screen displays the last 12 digits dialed but
you can enter up to 20 digits.
1. Enter the phone number.
2. To enter a pause, press and hold
. A pause is displayed as “P”.
3. When you enter more than 12 digits, turns on. If you attempt to enter
more than 20 digits, you’ll hear a reject tone.
4. If you make a mistake, press
DEL to erase one digit at a time. Or you
can press and hold DEL to clear the entire number and return the
phone to standby.
5. Press
to dial out the number.
Dialing from a phonebook record
1. Press
during standby.
in the display turns on.
2. Press and to search for the record that you would like to
edit. Or you can use the number keys to jump directly to the record
starting with the corresponding letters of that key.
3. Pressing
OK
repeatedly will show the name and number of the record
accordingly.
4. Press
to dial out the number.
Redialing a stored dialed number
1. Press
. The last number dialed is displayed.
2. Press and to scroll through the last 5 dialed numbers.
turns on when the number contains more than 12 digits. Press
OK
to
view the off-page digits.
3. Press
to dial out the number.
Redialing the last dialed number
1. Press
and wait for the dial tone.
2. Press
to dial out the last number dialed.
During an external call
Call timer
01-10
The call timer will be displayed a short while after your call is connected. It
shows the duration of the call. This timer is shown in minutes and seconds
(MM-SS) in the first hour. After that, it will be shown in hours and minutes
(HH-MM) with the “-“ blinking to indicate the seconds.
When you end a call, the timer will be displayed for 5 more seconds before
the screen returns to the handset label.
Hands free mode
Press
for hands free conversation during a call. You can now talk in to
the microphone without holding the handset to your ear. in the LCD turns
on to indicate that you are now in hands free mode.
Press
again to return to normal TALK mode.
Adjusting the volume
Press
and to adjust the receiver/speaker volume. The display
shows the volume level of high, medium or low.
Muting the call
1. Press
to mute the call.
turns on. The caller will not be able to
hear you but you can still be able to hear the caller.
2. Press
again to unmute the call.
Chain dialing
You can dial out numbers from the phonebook even after you have seized
the phone line. And there is no limit to the number of times chain dialing is
accessed.
1. Press
.
turns on.
2. Press and to scroll through the phonebook records. Or
you can use the number keys to jump directly to the record starting with
the corresponding letters of that key. If you decide to quit using chain
dialing, simply press
again to exit.
3. Press OK to dial out the number.
6