Oricom ECO71 Cordless Telephone User Manual


 
28
AdvANCEd uSE OF YOuR TELEPhONE
2. Press the
Navigation
keytoselectADVANCED
SET and then press
OK
keytoselect.
3. Press the
Navigation
keytoselectFIRST
RINGandthenpress
OK
keytoselect.
4. Pressthe
Navigation
keytoselectONor
OFFandthenpress
OK
keytoconfirm.A
conrmationbeepisplayed.
Reset unit
Youcanresetyourphonetoitsdefaultsettingswith
this feature.
1. Press
MENU
keytoentermenuselection.
2. Press the
Navigation
keytoselect
ADVANCEDSETandthenpress
OK
keyto
select.
3. Press the
Navigation
keytoselectRESET
and then press
OK
keytoselect.
4. Press
OK
keyagaintoconfirm.A
confirmationbeepisplayedandtheunitis
reset to its default settings.
Fornumbersstartingwith*,#orP,theprexnumber
willnotbeaddedtothe
Pre-dialnumberafter
TALK
keyispressed.
Change recall time
Youmayneedthe
R
buttontosendaRecallsignal
ifyouareconnectedtoaPBX.Youshouldnormally
leave the Recall Time at its default setting of Short
(100ms),asthisisthestandardrecallrequiredin
thetelephonenetwork,butitcanbechangedto
Medium (270ms) or Long (600ms) if your telephone is
connectedtoaPBXthatrequiresadifferentrecalltime.
1. Press
MENU
keytoentermenuselection.
2. Press the
Navigation
keytoselect
ADVANCEDSETandthenpress
OK
keyto
select.
3. Press the
Navigation
keytoselectRECALL
TIME and then press
OK
keytoselect.
4. Pressthe
Navigation
keytoselectSHORT,
MEDIUMorLONGandthenpress
OK
keyto
conrm.Aconrmationbeepisplayed.
Set first ring
WhenthisfunctionissettoOff,thefirstringfrom
an incoming call will not sound. This is useful on
exchanges where calling line identity is sent after the
rstring.
1. Press
MENU
keytoentermenuselection.
Note:
Uponreset,allyourpersonalsettings,calllogand
rediallistentrieswillbedeletedandthephone
willreturntoitsdefaultsettings.However,your
phonebookwillremainunchangedafterreset.
Also,ifyouhaveanansweringmachinemodel,
anyrecordedmessageswillremainunchanged,
butallothersettingswillbedefaulted.