Oricom ECO71 Cordless Telephone User Manual


 
27
AdvANCEd uSE OF YOuR TELEPhONE
AdvANCEd uSE OF YOuR TELEPhONE
WAITINGisdisplayedonthescreen.Aconrmation
beepisplayedtoindicatesuccessfulregistration,
andthehandsetwillreturntostandbymode,withits
handsetnumberdisplayed.
• Ifnobaseisfoundwithinacertainperiod,NO
BASEwillbedisplayedwithanerrortoneto
indicate failed registration and the handset returns
tostandbymode,andyouwillneedtorepeatthe
registration sequence.
Un-register your handset
1. Press
MENU
keytoentermenuselection.
2. Press the
Navigation
keytoselectADVANCED
SET and then press
OK
keytoselect.
3. Press the
Navigation
keytoselect
UNREGISTERandthenpress
OK
keyto
select.
4. EntertheMasterPINwhenpromptedand
then press
OK
keytoconfirm.(Thedefault
masterPINis0000)
5. Press the
Navigation
keytoselectthe
handsetnumbertoun-registerandthenpress
OK
keytoconrm.
Aconrmationbeepisplayedtoindicatesuccessful
un-registration.
• Ifnoactionistakenonthehandsetwithin15seconds,
theun-registrationprocedurewillbeabortedandthe
handsetreturnstostandbymode.
Youmustuseahandsettoun-register handsets from
thebase.
Set prefix
Thisallowsyoutodeneaprexnumbertobeadded
tothebeginningofanypre-dialednumber,andto
defineadetectstringtopreventtheprefixnumber
beingaddedunlessthedetectstringmatchesthe
rstdigitsofthepre-dialednumber,inwhichcasethe
prexnumberwillreplacethedetectstringdigits.
Youcanenterupto5digitsforthedetectstringand
upto10digitsfortheautoprexnumber.
1. Press
MENU
keytoentermenuselection.
2. Press the
Navigation
keytoselectADVANCED
SET and then press
OK
keytoselect.
3. Press the
Navigation
keytoselectAUTO
PREFIXandthenpress
OK
keytoselect.
4. ToenteraDETECTDIGITstring,presspress
OK
keyagain.
The last stored detect string is displayed (if any).
Enteradetectstringnumber(maximum5
digits) and then press
OK
keytoconrm.
ToenteraPREFIXnumber,press
Navigation
todisplayPREFIXandthenpress
OK
key.The
laststoredprexnumberisdisplayed(ifany).
5. Entertheprefixnumber(maximum10
digits) and then press
OK
keytoconrm.A
conrmationbeepisplayed.
• Ifnodetectstring(blank)isentered,theprefix
numberwillbeautomaticallyaddedtothepre-dial
numberafter
TALK
keyispressed.