Oricom ECO70 Cordless Telephone User Manual


  Open as PDF
of 36
 
26
Troubleshooting
Problem Possible cause(s) Solution(s)
Nodialtoneonthe
cordless handset.
1.Thebaseunitisnotproperlyconnected.
2. Too far from the base unit.
3.Batterychargeislow.
4.Incorrectbatterypolarity.
5.Re-registerhandset.
1.CheckCONNECTIONtopowerandtelephoneline.
2.MovehandsetCLOSERtobaseunit.
3.CHARGEbattery.
4.RE-INSERTbatteriesandcheck+and
.
5.Handsetnotregistered.
Antenna symbol is flashing. 1.Thehandsetisnotregistered.Ifthehandsetis
unregistered,itdisplaysUNREGISTERED.
2. The handset is out of range.
3.Theproductisnotproperlyconnected.
1.REGISTERthehandset.
2.MoveCLOSERtothebaseunit.
3.CheckpowerCONNECTIONtothebase.
Nobeepwhenthecordless
handset is placed on the
charger.
1.Thehandsetisnotplacedproperlyonthecharger.
2. Charging contacts are dirty.
3.Nopowerconnectiontobaseunit.
4.Thehandset’spoweristurnedoff.
1.LifthandsetoffthechargercarefullyandREPOSITION
correctly.
2.CLEANchargingcontactswithacleananddrycloth.
3.CheckpowerCONNECTIONtothebase.
4.CHECKbatteries.
Handsetchargedfor24
hoursbutBatteryicon
remains empty.
1.Handsetbatteryisdefectiveorfaulty.
2.Handsetisnotplacedproperlyonthecharger.
3.Batteryinstalledincorrectly.
4.Theproductisnotproperlyconnected.
1.REPLACEwithnewAAArechargeableNi-MHbatteries.
2.CHECKtomakesurethebatteryiconisscrolling.
3.RE-INSERTbatteriesandcheck+and
.
4.CheckpowerCONNECTIONtothebase.
Nosymbolonthedisplay. 1.Batteryisempty.
2. The product is not properly connected.
1.CHARGEbattery.
2.MakesureyourproductisproperlyPLUGGED-IN.
Can’ttransferacall. 1.Handsetisbusy.
2.Handsetisoutofrange.
3.Wronghandsetnumber.
1.CheckALLhandsetsandENDallcalls.
2.MovehandsetCLOSERtobaseunit.
3.CheckHANDSETNUMBER.
AppENDIx
 previous next