Filter
Top Products
14
CORDLESS hANDSET OpERATION
Multi-handset Operation
Your eco50 series phone can have up to 5 handsets
registered to the base unit. Each handset has its own number
HS-1, HS-2, HS-3, HS-4 and HS-5, shown on the left-hand
side of the display. With 2 or more handsets you can:
• Make intercom calls while on an external call
• Switch between an external call and intercom call
• Transfer an external call from one handset to another
• Set a 3-way conference call between yourself, an
external call and intercom call
Note:
• A maximum of 1x external call and 2x intercom calls can
take place at the same time.
• If you make an external call + another handset is on line
= result in a busy tone.
• You can make an intercom call when the other handset is
in progress.
Call transfer between cordless handsets
During external call,
1. Press [ INT ] key. The following will appear on the display.
2. Key the handset number (1, 2, 3, or 4) you wish to
transfer.
3. Press [
] key to exit Intercom mode and return to
standby mode.
Conference calls
This function allows 3 parties (yourself + external call +
intercom call ) to be connected at the same time.
During external call,
1. Press [ INT ] key. The following will appear on the display.
2. Key the handset number (1, 2, 3, or 4) you wish to invite
to the conference.
3. Then you can have an intercom call with HS-x.
4. At this moment, you can press and hold [INT] key for 3
seconds to go to 3-way conference call.
Cordless handset keypad lock
During standby mode,
1. Press and hold [
] key to lock the keypad.
2. To release keypad lock, press and hold [
] key for 3
seconds.