Page 3
A handset user guide is supplied with each Symbol
®
NetVision handset which describes, in detail,
how to use the buttons on the handset, including any data-related buttons found on the NetVision
Data phone. Note: The buttons described here are not located in the same place on all models.
You must be logged into the network:
The handset display shown below is from the NetVision handset. If you have a NetVision data
telephone or a new version of the handset, the shape of the display may have a different
appearance, however, the icons on all handsets indicate the same thing:
Logging in: Logging out:
Press to turn the handset on.
Press and hold to turn the handset off.
Enter your PIN number, and press .
Make call: Enter number and press . Answer Call: Press .
If you pressed to silence a ringing call, to
retrieve the call, press or
choose Off-hook, if it is programmed into
the menu.
Note: This sequence also produces a dial tone
on an idle telephone.
End call or feature: Press .
To Hold or Unhold a call, or to toggle
between two calls: Press .
To Hold the call and drop the link so someone
else can pick it up, press .
To recover a held call from a dropped link,
press: .
Logging into and out of the network
SND
SND
END
END
SND
SND
Quick start hints
SND
SND
SND
SND
END
END
SND
SND
FCT
END
END
HOLD
HOLD
HOLD
HOLD
END
END
SND
SND
HOLD
HOLD
Active handset display
NAME
XXX-XXXX
Radio signal strength indicator
Active line indicator
Battery strength
indicator
Call information
Idle/alert icon
active call icon
NetVision quick start call basics
