Nortel Networks M3904 Cordless Telephone User Manual


 
63
Additional Call Features
Radio Paging
Some telephone systems can have an on-site Radio Paging system. This system
feature allows you to page a person and stay on the line until they answer. The
paged person answers the call when they enter a special Paging “Meet - me”
code from any telephone. This connects the person paged to the party who paged
them.
Note: On the Meridian SL-100, dial the Paging Feature Access Code (FAC). A
network connection is established with the paging access trunk. This provides
access to loudspeaker paging equipment. Automatic Pre-selection, Automatic
Post-selection, and Special Radio Paging features do not apply to
Meridian SL-100.
To use Automatic Pre-selection
(“Meet - me” page):
1. Lift the handset.
2. Dial the Radio Paging FFC.
You receive paging dial tone.
3. Dial the number of the party you want
to page.
You receive ringback/ring tone.
Note 1: The person you paged uses any
telephone to enter a Radio Paging Answer
code, plus their own DN. This action
connects you and the person paged.
Note 2: If your call goes unanswered for a
preset time period, you receive a
continuous high pitched tone then silence.
Press the Goodbye Key.
To use Automatic Post selection: The called party is either busy on the
telephone or away from the desk.
To page the called party there is no
need to redial the number of the called
party.
1. Press the Radio Page Key.
You receive special dial tone.
RadioPage