Nortel Networks M3904 Cordless Telephone User Manual


 
52
Additional Call Features
Additional Call Features
Auto Dial Transfer Feature
Auto Dial Transfer allows you to use your Auto Dial Key to transmit digits to the
central office after a Trunk Switch Hook Flash. You must be on a central
office/exchange (CO) trunk call from or to a CO which offers Centrex or
exchange line-type features.
To use Auto Dial Transfer when you
pick up an incoming trunk call:
1. Press the Centrex Switch Hook Flash
Key and wait for interrupted dial tone.
Note: On the Meridian SL-100, Press the
Transfer Key instead of the Centrex Switch
Hook Flash Key. Auto Dial can be used to
transfer calls however, you do not have to
be on a central office trunk call, and the
Centrex Switch Hook Flash key is not
applicable to the Meridian SL-100.
2. Press the Auto Dial Key to call the
number desired.
/
3. Press the Goodbye Key to end the call.
Use the buzz signal
Buzz allows one person, whose telephone is linked to another telephone, to signal
the other telephone. The person signaled hears a buzz. Use this feature to notify
the other person of a call, a visitor, or a request.
To buzz the telephone linked to
yours:
Press the Buzz Key.
The telephone linked to yours, buzzes
as long as you hold down the key.
Note: Buzz signal is not available on the
Meridian SL-100.
CentrexSHF
AutoDial
Goodbye
Buzz