Filter
Top Products
Operating your IP Phone 1230
134
Using Automatic Preselection (Meet-Me page)
Perform the following procedure to use Automatic Preselection.
Using Automatic Post-selection
The called party is either busy on the telephone or away from their desk.
To page the called party, you do not need to redial the number of the
called party.
1. Lift the handset.
2. Dial the Radio Paging Access FFC.
You hear the paging tone (two beeps
followed by a dial tone).
3. Dial the number of the party you want to
page.
After dialing, you hear the ringback tone.
The paged party can use any telephone
to enter a Radio Paging Answer FFC
and their own DN number.
4. If your call remains unanswered for a
preset time period, during which you
hear a 15-second high-pitched tone
sounds followed by silence, press the
Goodbye key or replace the handset.
1. Press the RadPag soft key.
You hear a special dial tone.
or
(Goodbye)
RadPag