Filter
Top Products
i2022 ISDN Teleset
50
PROGRAMMING A DSS/BLF (DIRECT STATION SELECT / BUSY LAMP FIELD) FEATURE
To program a DSS/BLF
1. Ensure the Call Appearances to be used for the BLF are set to General Call Appearances.
2. Press MENU, MORE, MORE, MORE, DSS/BLF
3. Select a Call Appearance. Press it a second time to confirm your selection.
4. Press the SetAddr softkey. If your line is a Centrex line, the DN must be edited. For convenience, 4-digit, 5-digit, and
7-digit dialing options are provided. Use the edit key to effect the changes.
DSS/BLF Operation
After you answer the incoming call, press the Transfer Key. You will receive dial tone. Press the appropriate DSS key and
then Transfer. The call will be transferred.
DISABLING SOFTKEYS
Sometimes a softkey feature will appear on the display and not be available to the user. For example, the PkUp key
appears on the display but the Call Pick-Up feature is not available to the user. Other times a user may prefer to have a
hardkey and an LED indicator for a feature. Many users prefer moving Call Forward to a hardkey.
To disable a softkey:
Press MENU, MORE, MORE, Config, SetKey, SetFA. The display will show the softkeys and the Feature
Activator/Indicator assigned to the feature.
Press the FA softkey to scroll through the list of features.
NOTE: When a Call Appearance is programmed as a DSS/BLF, the user cannot bridge onto an active call. The
key no longer operates as a Shared Call Appearance.
NOTE: A 32 key add-on module, the EM-32 is available for additional keys. These additional keys can be used
for the DSS/BLF.
NOTE: The SetKey feature list is local to the Teleset. It will only reflect the current programming of the Teleset.
To ensure accuracy, run a Parameter Download (National ISDN only) before using SetKey. See 80 for
information on Parameter Downloading