Filter
Top Products
i2022 ISDN Teleset
21
2. Press FA to scroll the features on the display.
3. The following features: PkUp (Call Pickup), Fwdon (Call Forwarding), Confr (Conference), Transfer, Drop, MsgWt 1
(Message Waiting 1) and MsgWt 2 (Message Waiting 2) are enabled as you scroll though them. If the switch is set for
EWSD
®
the Transfer key may not be present.
4. To change or set the Conf key, scroll to the conference key, press Change and enter the feature number using the
touch-tone keypad. (Conference key is not programmable with 5ESS Custom ISDN)
5. Press Save. Repeat this procedure for Transfer and Drop and other features. (Not programmable with 5ESS Custom ISDN)
SETTING UP THE TELESET
Adjusting the Display Viewing Angle
The display module on the i2022 Teleset tilts for ease of viewing. This is a handy feature when reflections from room
lighting or instrument placement make the display less readable. Select any of eleven angle settings by lifting the display
from the rear with your finger. Return the display to a lower position by pressing down on the top
of the display case, not
the window.
Setting the Contrast
The display contrast is adjusted by pressing MENU, then MORE. The following display appears.
NOTE The MSG (Message Waiting) indicators can be set to either flash or not flash by selecting the Light or
Flash key in the SetFA menu.