Filter
Top Products
Using the headset
18
The phone that was first paired with the headset is called the "default phone". The
phone that was last used with the headset is called the "last used phone".
If the headset is switched on within 10 metres of several paired phones, the
headset will try to connect to the "default phone" within a few seconds.
If the headset cannot connect to the "default phone" (for example, it is switched
off or its user rejects the connection), the headset tries to connect to the "last used
phone" within a few seconds. If the headset does not automatically connect to the
default or last used phone, press and hold the answer/end key.
If the headset cannot connect to either of these phones, it remains discoverable for
other phones, which is displayed by the blinking green indicator light.
If you want to use the headset with a paired phone that is not a "default phone" or
"last used phone", make the connection in the phone’s Bluetooth menu.
■ Resetting the headset
You can reset the headset to its original settings, for example, to change the
default user of the headset. Resetting the headset clears all of its settings,
including pairing information. To reset the headset:
Press and hold the power key and the upper end of the volume control key for 10
seconds. After the headset has been reset, it beeps twice and the red and the green
indicator lights alternate for several seconds.
HS-4W_EN_1st_tab.fm Page 18 Monday, August 15, 2005 11:47 AM