Nokia HS 4W Bluetooth Headset User Manual


 
Getting started
12
Reconnecting the paired headset to the compatible phone
To reconnect the headset to the default phone or the last phone used, switch on
the headset. Otherwise, make the connection in the phone’s Bluetooth menu as
instructed in the user guide of the phone.
Note that switching on the headset creates the connection automatically only if
you have set the phone to accept Bluetooth connection requests without your
permission. In Nokia phones this can be done by changing your paired devices
settings in the Bluetooth menu.
Troubleshooting
If you cannot connect the headset to the compatible phone, proceed as follows:
Make sure that the Bluetooth feature is activated on the compatible phone.
Make sure that the headset is switched on and paired with the compatible
phone.
Make sure that you have disconnected the previous Bluetooth connection from
the phone.
Check that the headset is within 10 metres of the phone and that there are no
obstructions, such as walls, or other electronic devices between the headset
and the phone.
HS-4W_EN_1st_tab.fm Page 12 Monday, August 15, 2005 11:47 AM