Filter
Top Products
Getting started
11
English
Once you have entered the passcode, the phone becomes the default phone
for the headset, if the headset has not been previously paired with another
phone. See also Using the headset with several paired phones on page 17.
The headset beeps once and an active Bluetooth connection is displayed by a
blinking yellow indicator light. The headset should now appear in the phone
menu where you can view the Bluetooth devices that are currently paired
with the compatible phone.
7. Start using the headset (see page 14).
Disconnecting the headset from the phone
The headset can be disconnected from the phone, if, for example, you want to
use another Bluetooth device with it. To disconnect the headset:
• Switch off the headset. OR:
• Disconnect the headset in the phone’s Bluetooth menu. OR:
• Move the headset more than 10 metres away from the phone.
The headset is also disconnected if the battery of the headset or the phone
becomes flat.
Note that you do not need to delete the pairing with the headset to disconnect
it. When you reconnect a paired headset, you are not asked for its passcode.
HS-4W_EN_1st_tab.fm Page 11 Monday, August 15, 2005 11:47 AM