Filter
Top Products
Diverse 5100 Handset & Charger ~ 4th Edition ~ 20th May ’03 ~ 5352
12
BT Diverse Helpline – 08457 908 070
SETTING UP
Leave the handset for approx. 16 hours
in the base station to charge the
batteries, as they are not charged in the
factory. The battery status icon flashes
on the handset to indicate that the
batteries are being charged.
To manually register a
BT Diverse 5100 handset to
another base station
If you want to register your
handset to another base
station you will need to
manually register it.
On the handset to be registered:
Press the MENU options button.
Press the DOWN button until
the display shows
REGISTER HS
.
Press the OK button. Display
show
PIN
.
Enter your 4-digit Pin (original
setting
0000
).
Press the OK button. Display
flashes
REGISTER HS
.
Following the user guide for
the base station you are
registering to place the base
into registration mode.
MENU
OK
OK
To de-register a handset
Press the INT options button.
Press the UP or DOWN button
to select the handset to be
de-registered (1-6).
Press the MENU options button.
Press the DOWN button until
the display shows
DE-REG H/SET
.
Press the OK button. Display
will show
PIN ****
.
Enter your 4-digit PIN
(original setting
0000
).
Press the OK button. Display
shows
DE-REGISTER?
Press the OK button to confirm.
SAVED
is displayed.
Press the RED PHONE button
until you reach the idle screen.
INT
MENU
OK
OK
OK
Battery level icons
When the batteries are almost flat a
beep sounds and the display shows the
empty battery icon. You will need to
recharge your handset before you can
use it. The various states of charge are
shown below:
Batteries fully charged
Batteries at 66%
Batteries at 33%
Batteries empty