Filter
Top Products
55 Copyright
©
2006 Nokia. All rights reserved.
Settings
55
Security level > Phone — to set the phone to ask for the
security code whenever a new SIM card is inserted into
the phone. If you select Memory, the phone asks for the
security code when the SIM card memory is selected,
and you want to change the memory in use.
Access codes — to change the security code, PIN code,
UPIN code, PIN2 code, or barring password
Code in use — to select whether the PIN code or UPIN
code should be active
Authority certificates or User certificates — to view the
list of the authority or user certificates downloaded
into your phone. See ”Certificates” p. 80.
Security module sett. — to view Secur. module details,
activate Module PIN request, or change the module PIN
and signing PIN. See also ”Access codes” p. 11.
■ Restore factory settings
To reset some of the menu settings to their original
values, select Menu > Settings > Rest. factory sett..
Enter the security code. The names and phone numbers
saved in Contacts are not deleted.
■ Phone software updates
Your service provider may send phone software updates
over the air directly to your device (network service).
This option may not be available, depending on your
phone and network.
Warning: If you install a software update, you
cannot use the device, even to make
emergency calls, until the installation is
completed and the device is restarted. Be sure
to back up data before accepting installation
of an update.
Settings
This option may not be available, depending on your
phone. To allowed or disallow phone software updates,
select Menu > Settings > Configuration > Device
manager sett. > Serv. softw. updates and following
options:
Always allow — to perform all software downloads and
updates automatically
Always reject — to reject all software updates
Confirm first — to perform software downloads and
updates only after your confirmation (default setting)