49 Copyright
©
2006 Nokia. All rights reserved.
Settings
49
Packet data
General packet radio service (GPRS) is a network service
that allows mobile phones to send and receive data
over an Internet protocol (IP)based network.
To define how to use the service, select Menu >
Settings > Connectivity > Packet data > Packet data
conn. and from the following options:
When needed — to set the packet data connection to
established when an application needs it. The
connection will be closed when the application is
terminated.
Always online — to set the phone to automatically
connect to a packet data network when you switch the
phone on
Modem settings
You can connect the phone using Bluetooth wireless
technology or USB data cable connection to a
compatible PC and use the phone as a modem to enable
GPRS connectivity from the PC.
To define the settings for connections from your PC,
select Menu > Settings > Connectivity > Packet data >
Packet data settings > Active access point, and activate
the access point you want to use. Select Edit active
access pt. > Alias for access point, enter a name to
change the access point settings, and select OK. Select
Packet data acc. pt., enter the access point name (APN)
to establish a connection to an network, and select OK.
You can also set the EGPRS dial-up service settings
(access point name) on your PC using the Nokia PC
Suite software. See ”Nokia PC Suite” p. 83. If you have
set the settings both on your PC and on your phone, the
PC settings are used.
Data transfer
Synchronize your calendar, contacts data, and notes
with another compatible device (for example, a mobile
phone), a compatible PC, or a remote Internet server
(network service).
Your phone allows data transfer with a compatible PC
or another compatible device when using the phone
without a SIM card.
Transfer contact list
To copy or synchronize data from your phone, the name
of the device and the settings must be in the list of
transfer contacts. If you receive data from another
device (for example, a compatible mobile phone), the
corresponding transfer contact is automatically added