Filter
Top Products
Nokia 3200 User Guide 67 Copyright © Nokia 2003
Settings (Menu 4)
Data communication applications
For information on using a data communication application, refer to the
documentation provided with the application.
If you use an IR connection, activate the IR connection in your phone by selecting
Settings
> Connectivity > Infrared from the menus. Also, make sure that the
connection is active in your PC.
For better performance during data calls using an IR connection, place the phone
on a stationary surface. Do not move the phone during a data call.
If you use the DKU-5 data cable:
1 Connect the cable to the USB port on your computer and to the connector on
your phone.
2 Start using the data communications application on the computer.
Note: Making or answering phone calls during a computer connection is
not recommended as it might disrupt the operation.
• CALL SETTINGS
Call forwarding
Call forwarding tells your network to redirect incoming calls to another number.
Call forwarding is a Network Service and may not work the same in all networks.
Contact your service provider for availability.
ACTIVATE CALL FORWARDING
1 From the menus, select Settings > Call settings > Call forwarding and one of
the following:
Forward all voice calls—Forward all calls to the number you specify.
Forward if busy—Forward incoming calls when you are in a call.
Forward if not answered—Forward incoming calls to another number if you
are unable to answer. You can also set a delay before forwarding takes place.
Forward if out of reach—Forward incoming calls when your phone is off.
Forward if not available—Forward calls that are not picked up. You can also
set a delay before forwarding takes place.
Forward all fax calls—Forward all fax calls to a fax mailbox.
Forward all data calls—Forward all data calls to a data mailbox.
Cancel all call forwarding—Cancel any call forwarding options you may have
set.