Filter
Top Products
28 Copyright © Nokia 2003
You are prompted to reenter the new security code for verification.
4 Enter the new security code again and select OK.
A message appears in the display confirming your security code has been
changed.
PIN code
Before you can change your PIN code, you need to enable PIN code request. See
“PIN code request” on page 23.
1 From the menus, select Settings > Security settings > Access codes >
Change PIN code.
After a brief pause, you are prompted to enter the current PIN code.
2 Enter the PIN code and select OK.
You are prompted to enter the new PIN code.
3 Enter the new PIN code and select OK.
You are prompted to reenter the new PIN code for verification.
4 Enter the new PIN code and select OK.
A message appears in the display confirming your PIN code has
been changed.
PIN2 Code
The PIN2 code is required for features such as Fixed dialing. If you enter an
incorrect PIN2 code three times in succession, the PIN2 code is blocked and you
will have to enter the PUK2 code.
Note: The original PIN2 code must be obtained from your service provider.
Use this procedure to change your PIN2 code.
1 From the menus, select Settings > Security settings > Access codes >
Change PIN2 code.
You are prompted to enter the current PIN2 code.
2 Enter the current PIN2 code and select OK.
You are prompted to enter the new PIN2 code.
3 Enter the new PIN2 code and select OK.
You are asked to verify the new PIN2 code by entering it again.
4 Enter the new PIN2 code and select OK.
A message appears in the display confirming you have changed the PIN2 code.