Filter
Top Products
V90 VoIP Phone User Guide YML871Rev1
8 www.netcomm.com.au
Standards Supported
• SIP V2.0 Standard (RFC 3261)
• SDP (RFC 2327)
• Digest authentication and MD5 encryption (SIP)
• ITU-T G.711 Alaw/Ulaw, G.729A, G.729AB, G.723.1 and GSM Voice Codec
• RTP (Real Time Data Transmission) RFC1889
• RTCP (Real Time Transport Control Protocol) RFC 3550
• Proprietary Firewall/Passthrough Technology
• Simple Traversal of UDP over NAT (STUN)
• Web-based Management
• PPP over Ethernet (PPPoE)
• PPP Authentication Protocol (PAP)
• Internet Control Message Protocol (ICMP)
• TFTP Client
• Hyper Text Transfer Protocol (HTTP)
• Dynamic Host Configuration Protocol (DHCP)
• Domain Name System (DNS)
• Out-band DTMF Relay: RFC 2833 and SIP Info
• SIP proxy address in DHCP (RFC 3361)
• RFC 3265 and RFC 3842 for Message Waiting Indication
Hardware Interface
• Ethernet PC & LAN Port (2 x RJ-45, 10/100BaseT)
• Headset Jack
• DC Jack
Note: If your network is not PoE (Power over Ethernet) enabled then you will require an external power adapter before you can use the
VoIP Phone. Please contact NetComm to purchase the correct power adapter for this product.
Shipping Contents
• The NetComm V90 VoIP Phone
Item Description
Warranty Registration
Phone warranty card
Quick Start Guide
Quick Start Guide
Ethernet Cable
Straight-through cable