Filter
Top Products
NDA-30130 Revision 1 Page 7
Voicemail Disconnect Installation & Operation Manual INSTALLATION & SET-UP
Mat Assignments
(cont)
AOKC Command: (Assignment of OAI Key Codes)
This command is used to associate the MSF facility and its Op-Code that was
configured in the APM for the application to one of the OAI Key Codes in the
MAT.
Step 1:
Select an unused OAI Key Code, from 1 to 14. To determine what Key
Codes are available for assignment, use the LOKC command to list the
AOKC Key Codes that are already assigned.
Step 2:
Enter the type of facility using the value that designates the MSF.
Step 3:
Enter the same MSF Op-Code that was configured for Voicemail
Disconnect in the APM. Retrieve it using the Providers command on the
APM Applications Configuration Entry screen.
AKYD Command: (Assignment of D
term
Function Key)
MAT Function Key Indexes #34 to #47 have been designated for use in the OAI
system and correspond to the 14 OAI Key Codes as illustrated in Figure 1-1 on
page 6. The AKYD command is used to assign a D
term
function key to the specific
MAT Function Key Index that, in turn, corresponds to the previously assigned OAI
Key Code. This command must be used to assign the function key on each D
term
that is to be set up with access to Voicemail Disconnect.
Step 1:
Determine the specific D
term
function key designated in the application
configuration as the key that is to be pressed to activate Voicemail
Disconnect from the D
term
.
Step 2:
Enter the same tenant number that is configured for the application in the
APM Application Configuration option (default is 1).
Step 3:
Enter the station number of the D
term
on which the function key is being
assigned.
Step 4:
Enter the D
term
function key to the MAT Function Key Index that in turn
corresponds to the previously assigned OAI Key Code.
Step 5:
Assign the virtual line, such as the subline.