Filter
Top Products
NDA-30130 Revision 1 Page 5
Voicemail Disconnect Installation & Operation Manual INSTALLATION & SET-UP
Configuring the Tenant Number Database
This database must be configured before the Voicemail Disconnect application can
operate. The database values are set using the APM Applications Manager Main
Menu-- Selecting the Database Administration option. The general sequence is
the following:
1. Build a Master Database File
Enter data into the master database fields to add the necessary phone line
numbers.
2. Process the Application Database
Use the Process Application Database option on the APM Database
Administration menu to create the application database file.
(When the Process option is activated, data is drawn from the master database
and converted to the formats specified in the application definition file.)
3. Install the Application Database
Use the Install Application Database option on the APM Database
Administration menu to enable Voicemail Disconnect to copy its database.
Note:
Refer to the APM Operations Manual for more detailed instructions on adding a
database.
Database
Administration
Any future administrative changes to the Voicemail Disconnect databases are made
through the APM Database Administration option. Refer to the instructions
provided in the APM System Administration Manual
to make changes to these
databases.
Continue to the next page to make the MAT assignments...