Filter
Top Products
Netlink e340 Users Guide
18
6. Press No until Tag Call is displayed.
7. Press the Yes softkey.
To tag a call as malicious:
1. During an active two-party call, press FCN until the Tag Call feature key is displayed.
2. Select the Tag Call feature key.
- or -
1. Press FCN during an active two-party call.
2. Select Trans/Conf.
3. Enter the Tag Call feature Access Code.
Call Park
To park an active call:
1. Press FCN, then press 1.
2. Dial the Call Park feature access code.
3. Dial the directory number on which to park the call.
4. To inform a user that a parked call is waiting, do one of the following:
• If automatic paging is enabled, announce the call and the park retrieve digits shown
on the display.
• If automatic paging is disabled, dial the required paging access code, and then, an-
nounce the call and the park retrieve digits shown on the display..
To retrieve a parked call:
1. Press .
2. Dial the Call Park - Retrieve feature access code followed by the directory number the call
is parked on. If there are multiple calls parked on the DN, dial the two-digit index number
to retrieve a specific call, or # to retrieve the longest parked call.
Call Pickup
To answer a call that is ringing at another station in your Pickup Group:
1. Press .
2. Press PkUp.
To answer a call that is ringing another station not in your Pickup Group:
1. Press .