Filter
Top Products
-1-
ABOUT YOUR PHONE
The Mitel Networks 5010 IP has eight fixed-function keys ( SUPERKEY,
MESSAGE, HOLD, CANCEL, TRANSFER/CONFERENCE, REDIAL, , )
and seven personal keys with built-in status indicators. The personal key on
the bottom left is always your Prime Line; the remaining personal keys can
be programmed as:
z
Feature keys (for example, Swap). You can program feature keys using
the Desktop Tool. Your administrator can also program feature keys.
z
Speed Call keys. You can program speed call keys from your phone, or
using the Desktop Tool.
z
Line Appearances. Only the administrator can program line appearances.
Note: For more information on the Desktop Tool, talk to your system
administrator.
Your telephone also features display-assisted selection of features, on-hook
dialing, and a large Message Indicator.
Note: When using the SuperKey, press Cancel to back up one menu level.
IMPORTANT NOTE FOR HEADSET USERS:
Mitel Networks Headsets with Feature Control Switch (PN9132-800-500-
NA/9132-800-501-NA) must be installed in the dedicated headset jack (the
j
ack nearest the front of the set). Installation will disable your handset
microphone. Disconnecting the headset at the jack or at the quick-
disconnect plug restores handset operation.
Telephone status indicators
When line is the indicator is
Idle Off
Busy On
Ringing Flashing slowly
On hold at your set Flashing rapidly
On hold at another set Flashing slow on/fast off