Filter
Top Products
ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished.
To turn the ROGER BEEP tone on, press the MENU button until the
display shows a “rb” icon while on the right of the “rb” display, an “oF”
icon appears. Select “on”bypressingthe▲\▼buttons and push
the PTT key, or press the MENU button to move to the next feature
setting.
To turn the ROGER BEEP tone off, press the MENU button until the
display shows a “rb” icon while on the right of the “rb” display, an “on”
icon appears. Select “oF” by pressing the ▲\▼buttonsandpush
the PTT key, or press the MENU button to move to the next feature
setting.
SILENT OPERATION
Your LXT500/535 Series has a SILENT OPERATION mode. In this
mode, all “beeps” and “tones” are disabled.
To turn the SILENT OPERATION mode on, press the MENU button
until the display shows a “bP” icon while on the right of the “bP” dis-
play, an “on” icon appears. Select “oF”bypressingthe▲\▼buttons
and push the PTT key or the MENU button.
To turn the SILENT OPERATION mode off, press the MENU button
until the display shows a “bP” icon while on the right of the “bP” dis-
play, an “oF” icon appears. Select “on”bypressingthe▲\▼buttons
and push the PTT key or the MENU button.
EXTERNAL SPEAKER/MICROPHONE JACK
Your LXT500/535 Series can be used with an optional external
speaker/microphone or headset, freeing your hands
for other tasks. To use an optional speaker / micro-
phone or headset:
l Insert the plug(s) into the SPK/MIC jacks.
l Place the earbud into your ear, and adjust the mic
into your desired position.
Note : You can charge a rechargeable NiMH
battery pack thru the CHG Jack