Midland Radio LXT500/535 Two-Way Radio User Manual


 
BATTERY
COMPARTMENT
BATTERY
COMPARTMENT
COVER
Press here and
push down to open
BELT CLIP
LOCK TAB
BELT CLIP
LATCH
INSTALLING THE BELT CLIP
To install the BELT CLIP, slide the clip up into the slot on the back of the radio
until the BELT CLIP LATCH clicks. To remove the BELT CLIP, press the
LOCK TAB up, then gently pull the belt clip down toward the bottom of the radio.
CHARGING THE BATTERY PACK
Your LXT500/535 Series is equipped to use a rechargeable NiMH battery pack
which can be recharged with the optional desktop charger (as described below).
The LXT500/535 can also be charged by inserting the AC adapter into the radio
charge jack. Initial charge time is 24 hours. Charge time is about 12 hours
thereafter. For maximum battery life, we recommend charging the battery pack
when the low battery icon comes on. Remove the radios from the charger when
the charge time expires.
To charge using a Desktop Charger:
1. Place the rechargeable battery packs in the radios.
2. Connect the AC adapter into an AC wall outlet.
3. Insert the AC adapter plug (or DC Cigarette Lighter adapter if
charging in vehicle) into the desktop charger jack.
4. Place the units into the desktop charger slot and note that the LED
indicator with RED color will light up, indicating charging function.