Filter
Top Products
The remote control is powered by a 1.5V type AAA Alkaline battery. When the power of the battery
weakens the battery icon will be displayed on the LCD screen. When the old battery is replaced
with a new one, there will be a beep to indicate the power is up and the clock on the LCD screen
returns to AM12:00 after displaying all the icons. Correct the time by pressing SET for 3 seconds
before using. Note: Even if the battery is replaced, your programmed set values shall remain
unchanged. The remote control automatically reads and memorizes all the previous set information
saved in the main control module.
2
Congratulations on your purchase of a quality Marksman automotive security and remote start
system. Marksman security products have been designed to provide the consumer with a
technologically superior product with years of trouble free operation. The information enclosed will
provide a ready reference of the operation and maintenance of your new Marksman security and
remote start system.
Remote Control Transmitters
Door
Unlock/Disarm
Silent
Arm/Disarm
Door
Lock/Arm
Battery Replacement
Engine
Start/Stop
System’s
Status Check
The LCD screen on the remote control displays graphic icons. It provides
you visual information on any trigger of the sensors and around the clock
surveillance to your vehicle as well as showing the present status of the
system.
4/5/6
54
C
Warning:
Press the button two times when the
battery compartment is empty,
then insert the new battery.
SET
Bi
6
M11RF-LCD-UM 9/10/04 9:48 AM Page 2