Magnadyne BT-HFKP10 Conference Phone User Manual


 
4
Button and Feature Locations
1. Microphone
2. Volume Decrease Button
Press to decrease the speaker’s output.
3. Volume Increase Button
Press to increase the speaker’s output.
4. Multi-Function Button
See Operation Instruction for more information.
5. Charging Socket
6. Speaker
7. LED Indicator
8. MODE Button (Mute)
Press to mute the speakerphone.
1
2 3
4
5
6
7
8
Turning On/Off the Speakerphone
Turning On: When speakerphone is in off mode:
Press and hold the multi-function button for 3 seconds until you hear a short beep. The LED will flash
blue for 3 seconds.
Turning Off: When speakerphone is in standby mode:
Press and hold the multi-function button for 3 seconds until you hear a long beep. The LED will flash red.
IMPORTANT: Press the multi-function button each time you turn the speakerphone on to reconnect the
paring so that the connection with the speakerphone and paired mobile handset is resumed. For pair-
ing, please refer to procedures under “Pairing”.
Pairing to a Mobile Handset
Prior to using the speakerphone for the first time, you must pair it with a Bluetooth-enabled mobile hand-
set. The following steps describes pairing instruction for a typical Bluetooth-enabled mobile handset.
1. Place the speakerphone and mobile handset no more than 3 feet apart.
2. Ensure the speakerphone is in the OFF mode.
3. Press and hold the multi-function button for 6 seconds until you hear a long beep. The LED will
flash red and blue alternatively. It’s now ready for pairing.
4. Activate your mobile handset’s Bluetooth accessing function by referring to your mobile handset
user guide for details. Mean while, the handset will search for accessible Bluetooth devices.
5. Select “BT-HFKP10” from the list.
6. Enter the pre-programmed passkey “0000” and press “OK” to pair the speakerphone and the
handset. When pairing is completed, you may hear a long beep and LED will flash blue 3 times.
The speakerphone is in standby mode when LED flashes blue every 3 seconds.
7. Press “Return” to go back to your handset’s main menu. (For most of the mobile handset models,
a headset icon will be shown on the screen.) You should now be able to make and receive calls
through the speakerphone. Please place the mobile handset to the speakerphone no more than 30
feet. (Obstruction could cause shorter sensing distance.)
IMPORTANT: Under the pairing mode, if the pairing cannot be completed within 2 minutes, the
speakerphone’s LED will flash off and speakerphone will be in off mode. Please repeat step 3 to 7 to
pair the speakerphone and mobile handset again.
Operation Instructions