Lucent Technologies MLA-28D Telephone User Manual


 
18
Voice Announce
To program:
See Programming Buttons & Settings, p. 20.
Make voice-announced calls from ICOM
Voice or SA Voice buttons on your phone
(see Line Buttons, p. 2) or use Paging (p. 16).
The Voice Announce feature allows you to
prevent voice announcements and paging calls
from interrupting you. Instead, the calls ring.
Voice Announce is a setting that you can turn
on or off without programming a button for it.
If you have a data station at your extension and
Voice Announce on, you should turn Voice
Announce off.
Often-Used Features
Saved Number Dial
Must be programmed on a button. To program:
See Programming Buttons & Settings, p. 20.
Use this feature to redial a busy or unavailable
number that you want to try later.
To use:
1. Before hanging up, press the programmed
Saved Number Dial button.
2. Press the same type of button used to place
the call (for example, ICOM, Pool, or SA).
3. To redial, press the programmed Saved
Number Dial button.
Special Characters
Features that dial numbers automatically may
need special characters to allow for correct
dialing or system response.
Press... See... Means...
Drop s Stop. Halts dialing
sequence to allow for
system response.
Hold p Pause. Inserts 1.5-sec
pause in dial sequence.
Multiple consecutive
pauses allowed.
Conf f Flash. Sends
switchhook flash. Must
be first entry in
sequence.
## # For Extension
Programming only
(
Ext Program
[
Prog
]):
End of Dialing. Use to
signal end of dialing
sequence or to separate
grouped digits.
##For dialing and
Directory listings: End
of Dialing. Use to
signal end of dialing
sequence or to separate
grouped digits.
System Speed Dial
To program:
See Programming Buttons & Settings, p. 20.
You can program 3-digit System Speed Dial
codes on a button. These are the same
numbers that are available from the System
Directory (p. 14). Dial these directly by pressing
the Feature button and dialing the code
(600–729).
MLX Display pp 17-18 4/11/97, 11:56 AM18