Lucent Technologies MLA-28D Telephone User Manual


 
11
Authorization Codes*
To program:
See Programming Buttons & Settings, p. 20.
This feature is useful at companies where there
are telephones in public areas that are restricted
from making some calls.
If your system manager has given you an
authorization code, you can pick up someone
else’s telephone, enter your authorization code,
and make an outside call with your own calling
privileges. You must activate the feature and enter
your code for each call you make, even when you
are adding people to a conference. It is not
necessary to use your authorization code for
inside calls. Using an authorization code does
not affect the button assignments on your own
phone or the phone where you enter the code.
Security Alert
Compromise of authorization codes
could lead to toll fraud or unauthorized
charges.
Memorize your authorization code, and do not
share it with anyone.
The way you activate the Authorization Code
feature depends upon the type of telephone you
are using to make the call.
If the telephone has a programmed
Authorization Code
button
, press it.
The system selects a line and automati-
cally activates the Speaker button (an
available line button is selected for you);
then continue with Step 3 below.
On an MLX display telephone
, press the
Feature button, then select
AuthCode
[
Auth
] from the display or dial 80; then
continue with Step 3 below.
To enter an authorization code at any type of
phone (except a QCC):
1. Lift the handset or press the Speaker
button. (You may first select an ICOM, SA,
or SSA button.)
2. Dial #80.
3. Dial your authorization code, followed by #.
4. Dial the dial-out code (usually a 9) for an
outside call and then dial the phone number.
5. To make another call, repeat Steps 1–4.
* Release 3.0 and later systems only.
Often-Used Features
Auto Dial
This feature must be programmed on a line
button; it dials an inside or outside number.
Use inside Auto Dial buttons to:
Dial other extensions or groups.
Page groups (see Paging, p. 16).
Use outside Auto Dial buttons to:
Dial outside phone numbers (with dial-
out codes but without account codes).
• Enter account codes automatically (when
programming, include # at the end).
Dial long-distance access codes.
Dial emergency contact numbers.
Note that you can also use other features to
automate dialing: Directories (p. 14), Last
Number Dial (p. 15), Personal Speed Dial
(MLX-10D, MLX-10DP, and MLX-16DP
telephones only, p. 17), Saved Number Dial
(p. 18), and System Speed Dial (p. 18). When
programming Auto Dial, use the Special
Characters table on p. 18, if necessary.
Include the complete dialing sequence for the
call.
To program on a button:
1. Label a button.
2. Press the Menu button.
3. Select
Ext Program
[
Prog
]
and
Start
.
4. Press the button to be programmed.
5. Select
ListFeature
[
List
]
and
Auto Dial
[
AutoD
]. For a paging group, select
List
Feature
[
List
] and
Group Page
[
GrpPg
] and
go to Step 7.
6. Select
Inside
[
In
] or
Outside
[
Out
]
and
Enter.
7. Dial the group paging number, extension,
or outside number and select
Enter.
8. Repeat Steps 1 and 4–7 to program
additional numbers.
9. Press the Home button.
To use an
Auto Dial
button:
1. To make a ringing call to an inside or
outside number, press the programmed
Auto Dial button, OR
To make an inside voice-announced call,
press an ICOM Voice or SA Voice
button and then press the inside Auto
Dial button.
2. The call is dialed automatically. If it’s a
voice-announced call, talk after the beep.
MLX Display pp 03-16 4/11/97, 11:54 AM11