Filter
Top Products
11
FIGURE 8: Placing the Voice Terminal onto the Wall Jack Mounting Studs
11. Snap the free end of the handset cord into the handset and place the handset in
the cradle.
NOTE: The handset hook you repositioned will hold the handset in place.
12. Lift the handset and listen for dial tone. If there is no dial tone, check all wire
connections to make sure they are secure. Also, perform a self-test to see if the
terminal is receiving power. (Press and hold down the button. If the
light next to the button flashes rather than goes on steadily, it means the
terminal is not able to communicate with the switch. If the Test light does not go
on, the voice terminal may not have power. In this case, check the connections
and then verify that the particular voice terminal is administered on the
DEFINITY switch.)
Wall jack
Test