Filter
Top Products
20 English
English 21
Logitech
®
Wireless Headset F540
Getting started with
Troubleshooting
www.logitech.com/support
I don’t hear anything through my headset
Check the LEDs on the front of the wireless base station.
No LEDs are lit
Check to make sure the wireless base station is plugged into a power outlet. If it is,
then do the following:
•Make sure the headset is powered on by pressing the power button for approximately
one second. If the headset doesn’t turn on, then the battery may be dead and you
should recharge it.
•If this doesn’t help, then confirm that your audio cables are correctly plugged into
the back of the wireless base station.
One LED is lit
If you have multiple devices connected to your wireless base station, check to make sure
you have the correct audio system selected. To change the audio system, push the INPUT
button on the headset.
If you are using a PS3, refer to Connecting PS3 voice chat to make sure your game system
audio output is set up correctly.
Check to make sure your game system is on and a game is active.
Adjusting the headset fit
The Headset F540 offers flexible adjustment of its ear cups, headband, and microphone
boom so you can experience a comfortable fit.
All three LEDs are blinking
The headset has not made a wireless connection
to the base station. Try re-pairing the headset and
the wireless base station by doing the following:
1. Press and hold the power button on the
headset for 15 seconds to put it into search
mode.
2. Press the connect button on the bottom of
the wireless base station.
My microphone doesn’t work
1. The microphone will work with any game that
supports voice chat on the PS3 and Xbox 360.
Please check your game manuals to make sure
the game supports voice chat.
2. If you’re using a PS3
Please check the cable connection between
the wireless base station and the PS3. Use the Mini-USB PS3 voice cable to make
this connection. Please refer to Connecting PS3 voice chat for more information.
3. If you’re using an Xbox 360
Please check the cable connection between the Headset F540 and the Xbox 360
game controller. Use the 2.5 mm Xbox 360 voice cable to make this connection.
Please refer to Connecting Xbox 360 voice chat for more information.
I’m hearing the wrong audio signal
If you have multiple devices connected to the wireless base station, you can change the
active audio system you are hearing. To change the active audio system, push the INPUT
button on the headset.
The voice chat volume roller isn’t working on my headset
You may need to change the voice chat settings in your PS3 or Xbox 360 system settings.
•For PS3, refer to Connecting PS3 voice chat.
•For Xbox 360, refer to Connecting Xbox 360 voice chat.
Voice chat is
muted when
microphone
boom is in the
up position.