Filter
Top Products
18 English
English 19
Logitech
®
Wireless Headset F540
Getting started with
Using the volume rollers and microphone mute button
•Use the two rollers on the left ear cup to independently control the volume of
the game and voice chat audio.
•You can mute your microphone by pressing the microphone mute button,
or by rotating the microphone boom all the way closed (up).
•When your microphone is muted, an LED located at the tip of the microphone will
illuminate red.
Turning off the headset
•Press and hold the power button for approximately one second.
•When powering off the headset, the LEDs on the wireless base station will blink briefly
and then turn off.
Turning on the headset
•Press the power button on the headset to turn it on.
•The headset will wirelessly connect with the wireless base station.
•You will see the three LEDs on the wireless base station turn on, blink briefly,
and then one of the LEDs will turn solid.
Using the input selector button
•If you have multiple audio devices connected to the wireless base station,
you can press the INPUT button on the headset to toggle through them.
•Press the button to change the audio source. On the front of the wireless base station,
the next LED will illuminate, representing the active audio source. (If there is only
one audio device connected to the back of the wireless base station, that input will
remain active).
Power button
Input selector
Wireless base station LEDs
Chat volume roller
Sound volume
roller
Microphone
mute button
Power button