Filter
Top Products
IB-PH5595-WM-E-032704
CALLER ID FEATURES
Storing the Phone Numbers from the Caller ID List
As the phone keeps the data of up to 70 calls, if the 71st call comes in, the phone deletes
the oldest data automatically.
To prevent important data from being deleted, you can store them into the 13 speed dial
memories (3 one-touch or 10 two-touch).
1.Display the phone number you want to store (by pressing UP or DOWN button).
2.Press STORE button. The call number is repeated in the display.
3.Press the DIAL button to change the memory dial digit (7-digit, 10-digit or 11-digit).
NOTE:
1. Do not allow more than 3 seconds to elapse between each step of the procedure.
2. If the phone is connected to a Private Branch Exchange (PABX), you may need to add
an outside line access digit or a pause, see page 10.
4.
For one-touch memory
Press a one-touch speed dial button
(M1 to M3).
For two-touch memory
Press the AUTO button, and then one
of the speed dial memories (0 to 9).
The phone number is now stored in that memory button (NOTE: Only the number will be
stored, not the name).
Calling back from the Caller ID List
12
A.When handset is on the base
1. Display the phone number you want to call back using the UP or DOWN button.
2.Press the DIAL button, “PICK UP OR ADJ” and the phone number will show in the
display.
3.Press the DIAL button again to choose the number of call-back digit to be
dialed out (7 digits - phone number by itself, or 10 digits - area code + phone number, or 11
digits - 1 + area code + phone number), different parts of the country have different dialing
systems even for local calls.
4.Pick up the HANDSET or press the SPEAKERPHONE, the phone will dial the displayed
number automatically.
B.When handset is picked up or using speakerphone
1. Display the phone number you want to call back using the UP or DOWN button.
2.Press the DIAL button, “DIALING OR ADJ” and the phone number will show in the
display.
3.Press the DIAL button again to choose the number of call-back digit to be
dialed out (7 digits - phone number by itself, or 10 digits - area code + phone number, or 11
digits - 1 + area code + phone number), different parts of the country have different dialing
systems even for local calls.
4.The phone will dial the displayed number automatically.
IB-PH5595-WM-E-032704.P65 4/8/2004, 3:17 PM14