Filter
Top Products
CH. 6 (CONT)
B. EDITING AN EMERGENCY BUTTON
These emergency buttons are empty and you must choose the number for each
button. Select the number reserved for:
Hospital Fire Police
Follow step 1 of the above “EDITING AN ENTRY”. Press the corresponding
button for hospital, fire, police. Continue with step 3 to 5 to completely enter an
emergency number.
Press the corresponding button again to display name and number you entered.
Press mode to exit display name and number and return to main display.
C. ADDING A PAUSE TO DIAL SEQUENCE
You may wish to press R/P to insert a pause between numbers. It is used for
dialing out from a telephone switch board, or making a short cut or “Cheat-sheet”
when banking by phone or Tele-teller system.
Pressing R/P will show a “P” on the LCD to indicate a 2 second pause in the
dialing sequence. Each pause counts as one digit.
D.USING TONE SERVICES ON A PULSE (rotary) LINE
If you have pulse dial phone line and area calling a tone dial Tele-teller service,
you can send out required signals without changing the dial mode.
1. Dial the servite's main number in pulse dial mode.
2. When the service answers, press
* , upper O will be displayed; or press #,
lower O will be displayed. From that point any additional numbers you dial
will be sent as tone signals.
3. After you hang up, your Starplus45 will reset the dial mode to pulse
dial automatically.
E. SPEED DIALING
*REVIEW NUMBERS FROM THE MEMORY
Press MEMORY button.
The display shows ITEM -XX-.
XX is the total memories stored in the memory. Enter the first letter of the name
(e.g “K” for KROWN): Press number 5 twice and scroll with until the name
and number you want to review shows on the display.
NOTE: If the number is longer than 15 digits, the number will shifted to the left and pause for 1 second
automatically until the end of the number has been reached. The Starplus45 will exit display mode
automatically 15 seconds after last activity.
13