Filter
Top Products
28
ADJUSTING DATE AND TIME
Changing the date
Select MENU > SETTINGS > TIME DATE > DATE (2,4,1).
Change the ashing gures for the year using the arrow buttons or by entering the
gures on the keypad. Press OK to conrm and to continue to the month, and then
proceed in the same way for the day.
Changing the time
Select MENU > SETTINGS > TIME DATE > TIME (2,4,2).
Change the ashing gures for the hour using the arrow buttons or by entering the
gures on the keypad. Press OK to conrm and to continue to minutes.
Changing the time format
Select MENU > SETTINGS > TIME DATE > TIME FORMAT (2,4,4).
Select either a 12-hour or a 24-hour format using the arrow buttons and press OK to
conrm your choice.
ADJUSTING RING LEVEL VOLUME
Select MENU > SETTINGS > RING LEVEL (2,5).
Select your choice and press OK to conrm.
There are six volume levels plus a silent mode. You will hear the ring tone for each
level you select. If you select silent mode, an LED on the phone ashes when an
incoming call is received.
ADJUSTING FLASH/R-PULSE DURATION
The R pulse/Flash (Register recall) is used to request a new line from the PBX. Different
countries and PBXs may require different durations for activating the pulse. Duration
requirements should be specied in the technical data for the PBXs.
Select MENU > SETTINGS > FLASH (2,6).
Select your choice and press OK to conrm.
Applicable settings:
100 ms – Scandinavia, Europe, Siemens HiPath
300 ms – Germany, France, Israel
500 ms – USA
SETTINGS