Filter
Top Products
11
The Konftel 300W connects to different makes of GAP-compatible DECT systems. The
Konftel 300W plus Konftel DECT base station package provides a solution for ofces
without a compatible DECT system.
REGISTRATION
The Konftel 300W has to be registered with a base station before it can be used. Note
that both the base station and the Konftel 300W have to be put into registration mode.
Here we explain how to register in a Konftel DECT base station. To register your Konftel
300W in other makes of base station, simply follow the same procedure. Please refer to
your base station instruction manual or contact your company’s switchboard administrator
if you are unsure.
If you have purchased a Konftel 300W with a Konftel base station, the conference
phone will already be registered with the base station. You will only need to register if
you have purchased the base station separately or are using a different make of base
station.
Put the Konftel DECT base station in registration mode
Hold down the key/LED on the base station for at least 3 seconds.
The LED ashes rapidly.
The base station is now in registration mode. Once registration has been completed, the LED will
stop ashing. If the base station does not identify a DECT phone within 10 minutes, the registra-
tion mode will switch off automatically.
A Konftel DECT Base station is automatically set to registration mode when it is con-
nected to the power supply.
CONNECT TO A DECT SYSTEM
Key and LED