Filter
Top Products
System Operating Procedures
October 2002 3-39
Controlling the Processor Drive
Turning the Drive On
1. Press Drive.
2. Press Set.
3. Press Drive.
The drive is on.
Returning the Drive to Normal Operation
1. Press Drive.
2. Press Set.
3. Press Drive twice.
The speed value is displayed.
Computer Reset
Resetting the Processor
NOTE: Before resetting the processor, make sure you record the current settings.
You may need to reenter them.
1. Press both Reset keys simultaneously.
2. Press any blue function key to clear the machine reset message.
Loading the Defaults and Changing the Configuration
This procedure allows you to:
• change the settings for the processor to metric values
• change the tolerance specifications for temperature and development time
• return all setting to their default values
IMPORTANT: Before loading defaults and change the processor configuration:
• Record all processor settings and calibrations.
• Turn the key switch to the service position.
Press and hold Set and both Reset keys. Release the Reset keys and then
release the Set key.
NOTE: The light above the left Reset key illuminates when both keys are pressed.
To save any changes and return to normal operation, reset the processor by
pressing both Reset keys simultaneously. Do not press Set.