Filter
Top Products
8 EchoLink
52 CONTENTS TM-D710A/E
8.4.4.1 Scan and Upload
Use a digital camera or scanner to create a graphics file of your license. Click “Scan and Upload”.
Enter the necessary information and upload the license file.
Note: Be sure to follow the tips below:
• File must be .jpg, .gif, .png or .tiff format.
• Size of file must be less than 5 MB.
• Callsign and other information on the license image must be legible.
When upload completes, a screen indicating “Validation-Upload” appears. Another message
appears (“Processing...Your validation request will now...”) that indicates the request for validation
has been accepted.
The process for validation is done by a support team of volunteers. When the validation process is
completed, you will receive an email that contains the notice of approval of validation. The email
will indicate “Validation approved for...”. Typically, the validation process usually completes within
24 hours.
8.4.4.2 Fax
Click “Fax”. Send your amateur radio license by fax to the telephone number presented on the
page. In this case, you will not receive a reply by fax. When the validation process is completed,
you will receive an email that contains the notice of approval of validation from the support team.
After receiving validation, the list of callsigns should appear on the EchoLink screen within a few
minutes.
8.4.5 Startup in Single User Mode
Connect a PC headset (or microphone and speaker) to your computer and start the EchoLink
software. The “Tip of the Day” window will appear.
Figure 8-19 EchoLink “Tip of the Day” Window