Kenwood TH-D7E Two-Way Radio User Manual


 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
60
VC-H1 CONTROL
If you have another transceiver that has the Tone
function, you can use it as a remote control for the
VC-H1. Transmit a subaudible tone from the remote
control to this transceiver connected with the VC-H1 for
more than 1 second. Then this transceiver causes the
VC-H1 to capture an image, executes the
superimposition, and transmits the image to the target
station. You must select the same tone frequency on
both transceivers; on this transceiver, program a CTCSS
frequency {page 39}.
Note:
If you have made no entry for superimposition, superimposition will
not be executed.
“EXECUTING” appears and blinks on this transceiver while a series
of operations is in progress.
STA
CON
PACKET
96
BCON
DUP
9
7
5
STA
CON
PACKET
96
BCON
DUP
9
7
5
1 Press [MENU] to enter Menu mode.
2 Press [3], [9] to select “3–9 (VC SHUTTER)”.
3 Press [UP]/ [DWN] to switch the function ON (or OFF).
4 Press [OK] to complete the setting.
Switching the function ON activates the CTCSS; “CT”
appears.
5 Press [MENU] to exit Menu mode.
The following table concludes the settings you must confirm:
1
For the TH-D7, use F–4 (CTCSS FREQ) {page 39}.
2
The camera and LCD monitor must not be left ON.
dna7D-HT
lortnocetomer
ehtsiycneuqerftnerrucehT
.noitatstegratehtsaemas
dna7D-HT
lortnocetomer
hctamseicneuqerfenotehT
1
.
lortnocetomeR.NOsinoitcnufenoTehT
1H-CVNOsirewopehT
2
.
Tone
TH-D7 E 57 SSTV with VC-H1 98.12.4, 0:13 PM60