Filter
Top Products
13
5 Press the PTT switch to save the setting and switch to the
QT/ DQT setting.
• A beep will sound and the transceiver announces “QT”.
6 Press the Up/Down key to select QT or DQT, then press the
PTT switch to confi rm the selection.
7 Press the Up/Down key to increment/ decrement the QT/
DQT number, to select the new value.
• Press and hold the Up/Down key to continuously increment/
decrement the QT/ DQT number.
• QT/ DQT numbers and their corresponding settings are
provided in the tables on pages 15 to 17.
• A voice announcement will inform you of the selected QT/ DQT
number.
8 Press the PTT switch to save the setting.
• A beep will sound and the transceiver announces “Channel
Number”.
• Repeat steps 3 to 8 to set up another channel.
9 Press and hold the PF-2 key and PTT switch to store the
settings and return to normal operation.
Note:
◆ The transceiver will automatically return to normal operation if
no action is performed for 20 seconds.
◆ Frequencies indicated by an asterisk * in the following table
may be susceptible to interference from other frequencies.
If interference occurs, change to a different frequency in the
following table.
Table Number
Operating
Frequency (MHz)
Table Number
Operating
Frequency (MHz)
0 OFF 9 461.0375
1 464.5000 10* 461.0625
2 464.5500 11* 461.0875
3 467.7625 12* 461.1125
4* 467.8125 13 461.1375
5 467.8500 14 461.1625
6 467.8750 15 461.1875
7 467.9000 16 461.2125
8 467.9250 17 461.2375