Kenwood PKT-23K Amplified Phone User Manual


 
7
ORIENTATION
3.5 mm phone jack
Connect the earphone/
microphone plug to this jack.
Micro USB jack (B Type)
Connect a USB cable to this jack
to charge the transceiver battery
pack.
PF-1 key
Press or hold this key for
1 second to activate its
programmable functions. The
default settings are [Scan](press)
and [Super Lock-P](hold).
For function descriptions and
details on how to change the
key functions, refer to “KEY
ASSIGNMENT MODE” on page
18.
PTT (Push to Talk) switch
Press and hold, then speak into
the microphone to transmit.
Power switch
Hold for 1 second to turn the
transceiver power ON. Hold for 2
seconds to turn the transceiver
power OFF.
Momentarily press this key while
the transceiver power is ON to
activate the Battery Level Guide.
Refer to the “BATTERY LEVEL
GUIDE” table on page 10.
Speaker
Microphone
Antenna