Filter
Top Products
12
CHANNEL SETUP MODE
This transceiver allows you to reprogram each of the channels
with different frequencies and QT (Quiet Talk)/ DQT (Digital
Quiet Talk) settings. The table below lists the default channel
settings.
Channel
Number
Table
Number
Frequency QT/DQT Setting
1 2 464.5500
MHz
67.0 Hz
2 8 467.9250
MHz
67.0 Hz
3 9 461.0375
MHz
67.0 Hz
4 10 461.0625
MHz
67.0 Hz
OPERATING FREQUENCY AND QT/ DQT SETTING
To change the operating frequency of a channel:
1 With the transceiver power OFF, press and hold the PTT
switch and Up key while turning the transceiver power ON.
• Continue to hold the Power switch, PTT switch, and Up
key until the LED indicator lights yellow and the transceiver
announces “Self”.
2 Release the Power switch, PTT switch and Up key.
• The transceiver announces “Channel Number”.
3 Press the Up/Down key to select your desired channel, then
press the PTT switch to confi rm the selected channel.
• Upon releasing the PTT switch, a beep will sound and the
transceiver announces “Table Zero”.
4 Press the Up/Down key to increment/ decrement the Table
number, to select the new channel frequency.
• Press and hold the Up/Down key to continuously increment/
decrement the number.
• Table numbers and their corresponding operating frequencies
are provided in the tables on pages 13 and 14.
• A voice announcement will inform you of the selected Table number.