Filter
Top Products
English
|
29
Other functions
Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2. Select the button you wish to register
Press the [P1] – [P3] button for at least 2 seconds.
Setting up the Hands-Free Phone
Press the [SetUp] button on Hands-Free Control
screen.
Hands Free Set Up
Return
Auto Answering
SelectSelect SelectDelete
Phone Voice
8
F-Right
Beep
On
AUTO
1
1
2
2
5
3
4
1 Sets an automatic response time after call
termination. ( "8")
"Off ": This function can not use.
"0-99": Sets to calling ring time (second).
2 Sets a ringing tone output position.
( "F-Right")
"F-Left": Outputs the tone from the front left-
hand side speaker.
"F-Right": Outputs the tone from the front right-
hand side speaker.
"Front All": Outputs the tone from the both front
speakers.
3 Set the beep of the incoming call. ( "On")
"On": Beep is heard.
"Off ": Beep is canceled.
4 Display the Phone Select screen.
5 Display the Phone Delete screen.
⁄
• Select the speaker which is further from the microphone in
order to prevent howling or echoes.
Selecting a Hands-Free Phone
1. Display the Hands-Free Set Up screen
Press the [SetUp] button on Hands-Free Control
screen.
2. Display the Phone Select list
Press the [Select] button on Hands-Free Set Up
screen.
Phone Select
Return
Kenwood 1
Kenwood 2
Kenwood 3
Kenwood 4
Kenwood 5
AUTO
3. Select a Hands-Free phone you wish to use
Press the [
Kenwood 1
] button.
⁄
• If a cell-phone is already selected, deselect it, and then
select a different one.
• The firmware version "BT300 FW ***" is displayed at the end
of the Bluetooth device list.
For how to update the firmware, access our website.
http://www.kenwood.com/cs/ce/bt/
• The audio player is displayed on the device list after the
registration. However, the audio player on the list cannot be
selected.
Deleting the Hands-Free Phone
1. Display the Hands-Free Set Up screen
Press the [SetUp] button on Hands-Free Control
screen.
2. Display the Phone Delete list
Press the [Delete] button on Hands-Free Set Up
screen.
Phone Delete
Return
Kenwood 1
Kenwood 2
Kenwood 3
Kenwood 4
Kenwood 5
AUTO
3. Select a Hands-Free phone you wish to delete
Press the [
Kenwood 1
] button.
⁄
• The Phone Book, outgoing call list, and incoming call list are
deleted together with the deleted Hands-Free phone.
• The firmware version "BT300 FW ***" is displayed and
cannot be deleted.