Filter
Top Products
12
english
JABRA STONE2
2 Turn your headset off manually by pressing the Answer/End
button for 4-5 seconds
3 Pair device number 2 with your headset using the same pairing
instruction again
4 Connect to device 1 again
Please note that it is important to connect to device 1 again after
pairing device 2 to ensure connection to both devices.
tRoUBLesHootInG & FAQ
I hear crackling noises
- Bluetooth® is a radio technology, which means it is sensitive to
objects between the headset and the connected device. It is
designed for the headset and the connected device to be used
within 33 feet (10 meters) of each other, with no major objects
in the way (walls, etc.).
I cannot hear anything in my headset
- Increase the volume in the headset
- Ensure that the headset is paired to a device that is playing
- Make sure your phone is connected to the headset by tapping
the Answer/End button
I am having pairing problems
- You may have deleted your headset pairing connection in your
mobile phone - follow the pairing instructions in ‘Pair Your
Headset to a Phone or other Device’
Will the Jabra STONE2 work with other Bluetooth® equipment?
- The Jabra STONE2 is designed to work with Bluetooth® mobile
phones. It can also work with other Bluetooth® devices that are
compliant with Bluetooth® version 1.1 or higher and support a
headset, hands-free and/or advance audio distribution profile
(A2DP)
I cannot use Reject call, call on hold, Redial or voice dialling
These features are dependent on the ability of your phone to
support a hands-free profile. Even if the handsfree profile is
implemented reject call, call hold and voice dialling are optional
features which are not supported by all devices. Please consult
your device manual for details