Filter
Top Products
MOVING ON
53
Axxess
®
Model 8662 Phone User Guide – Axxess IP Mode
PERFORMING A “HOOKFLASH” DURING A CALL
Certain telephone service companies may require a timed hookflash (a quick hang up
and release).
To generate a hookflash while using a line:
EITHER, Press the FLASH menu button. If the FLASH menu button is not visible,
press MORE until you see FLASH.
OR, Press and dial
.
PROGRAMMING YOUR FEATURE BUTTONS
Depending on how your system is programmed, some of your feature buttons may be
“user-programmable.” If so, you can program them with any of the feature codes
listed in the back of this user guide or with extension numbers. In addition, you can
combine the feature button and Station Speed-Dial functions to program a feature but-
ton to dial an outside number.
NOTE: You cannot program secondary extension buttons as feature buttons (see Pro-
gramming Secondary Extension Buttons on page 55).
To program a user-programmable feature button:
1. With the handset in the cradle, dial .
2. Press the feature button you want to program.
3. Dial the feature code or extension number you want to store under that button.
(Refer to page 71 for default feature codes.)
To return all feature buttons to their original default values:
With the handset in the cradle, dial
.
To display the current feature button values:
1. With the handset in the cradle, dial .
2. Press the feature button(s) you want displayed.
3. Press to hang up.
3 3 0
3 9 7
3 9 5
3 9 6