Filter
Top Products
59
Inter-Tel
®
Model 8524/8525/8526 User Guide
MOVING ON
PERFORMING A “HOOKFLASH” DURING A CALL
Certain telephone service companies may require a timed hookflash (a quick hang up
and release).
To generate a hookflash while using a line:
Press and dial .
NOTE: This features is known as a “Recall” in European systems.
PROGRAMMING YOUR FEATURE BUTTONS
Depending on how your system is programmed, some of your feature buttons may be
“user-programmable.” If so, you can program them with any of the feature codes
listed in the back of this user guide or with extension numbers. In addition, you can
combine the feature button and Station Speed-Dial functions to program a feature but-
ton to dial an outside number.
To program a user-programmable function button:
1. Press and dial .
2. Press the function button ( - ) you want to program.
3. Enter the feature code you want to store under that button. (Refer to the back of
this guide for default feature codes.)
NOTE: When you enter the feature code (314) to program the Backspace button as a
function button, the display may show MENU instead of BACKSPACE. Please ignore
the display, the feature code 314 is set to use backspace.
To return all function buttons to their original default values:
Press and dial .
To display the current function button values:
1. Press and dial .
2. Press the function button(s) you want displayed.
3. Press to hang up.
START 3 3 0
START 3 9 7
FNC 1 9
START 3 9 5
START 3 9 6
END