Filter
Top Products
22
Inter-Tel
®
Model 8524/8525/8526 User Guide
GETTING STARTED
MAKING AND RECEIVING CALLS
Making and receiving calls is the basic purpose of any endpoint. With your endpoint,
you can make/receive intercom and outside calls as well as make emergency calls.
Intercom Calls
Your extension number allows other people to place intercom calls to you, without
dialing any extra codes. And, because every endpoint in your telephone system is
assigned an extension number, you can call other people in your system quickly and
easily.
NOTE: Ask your system administrator for a list of extensions.
Placing Intercom Calls
To place an intercom call:
1. Press .
2. Dial an extension number.
3. Wait for the call to be answered.
4. When finished, press to end the call.
NOTE: Do not use the button to end a call, because that will turn
your endpoint off and you will not receive calls until you turn the endpoint
back on.
To place a non-handsfree call that will ring at the other endpoint until answered:
Press before dialing the extension number. (This step is not necessary if you
programmed your endpoint for the Ring Intercom Always feature described below.)
To program your endpoint to always send non-handsfree calls using the Ring
Intercom Always feature:
Press and dial . The current status is shown.
To leave a message if there is no answer or the endpoint is busy:
Press and dial
. Then press to hang up or wait for their message
center to answer. (See page 32 for more Message options.)
NOTE: This option appears only if the called endpoint has a voice mailbox.
Receiving Intercom Calls
The endpoint will ring or vibrate (Model 8525 and 8526 only) to alert you. Addition-
ally, a Line Indicator on the display may flash, and the display may show information
about the call, such as caller’s name and extension.
To receive an intercom call:
Press
to answer the call.
START
END
PWR
# >
START 3 7 7
FNC 6 END
START